WOLFBSUH Metal Horizontal Hit and Miss Complete

.The gasoline engine is elaborately made of all metal and the surface is polished to make it very smooth. The engine is fixed on the wooden base the structure is stable and reliable .Parameters: Engine size: 180 x 125 x 75mm. Size of wooden base: 180 x 66 x 50mm. Cylinder diameter: 22mm. Stroke: 20mm. Revolution: 1200rmp/min. Power supply: 3.7v. Fuel: gasoline Manufactured by WOLFBSUH. .Engine Startup Steps: 1. Open the bottom of base to check the wiring of the engine connect the fuel tank piep and install 3 AA batteries(not included). 2.Fill the fuel tank with gasoline(95). When the filling is completed make sure theres no air in the oil pipe. 3.On the right side of the engine(installation of the flying hammer position) slowly turn conterclockwise by hand to buy more than one turn.Its role can make the mixed gasoline fully enter the cylinder. .Precautions: 1.If the ignition device is normal and the cylinder is under normal compression if the machine still does not start normally its very likely that the carburetor needle should be adjusted. 2.Screw the screw on the top of the carburetor then loosen 1/4 turn start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio. .This horizontal gas engine looks unique. The water cooling stirling engine with wooden base for easy placement and operation. You will love this exquisite horizontal gasoline engine model